Colt King Cobra Revolver Review

The King Cobra revolver has a fan base that goes back to 1986. Colt took note of what fans had to say and relaunched the weapon in 2019. This new model is similar in dimensions the Trooper, Detective Special and Cobra.

The traditional Colt style, this cylindrical cylinder is rotated in a clockwise direction. It is locked by an activated rearward cylinder release.

.357 Magnum

The King Cobra fills a noticeable niche in the current-production, mid-sized revolver market. Anyone looking to own a sturdy, lightweight single-action firearm for coltforsale.com defense in the middle-sized frame category were previously forced to choose from heavy-weight L-Frames, such as that of S&W’s Detective Special or the comparatively compact Ruger GP100.

The King Cobra’s lineage is traced back all the way to Colt Police Positive Special from 1908. The six-shot,.38 Special-compatible, D-frame revolver took over the concealed-carry market until it was taken in the year 1995 due to a decline in market demand.

Similar to the initial King Cobra, the new model is a sturdy, robust piece of equipment. Its “heavy Duty” V frame is equipped with a barrel rib that’s solid, and it has an extended underlug that is designed to shield the Ejector. The hammer spur of the frame is serrated for a strong thumb hold when firing the revolver, and the trigger guard is big enough to hold large fingers and those with gloves.

The brand new King Cobra Target pairs a front sight that’s adjustable and notched with a brass front bead. This is a traditional approach to sights that prioritizes the reliability of a gun used for defensive purposes. If one wants to make the leap into more modern times and opt for a tritium or fiber-optic front sight could be put in simply by unloosening the screw just above the muzzle. The barrel of the snub-nosed revolver comes with the 1:14″ left-hand twist and the Patridge style front blade. The revolver’s length and weight are 8.25″ as well as 28 oz respectively. The King Cobra is packaged in a standard blue plastic case with a padlock, test target, and a detailed instruction manual specifically designed for this specific revolver.

Stainless Steel

The Stainless Steel colt king cobra is a small frame revolver chambered in the.357 Magnum cartridge. It can hold six rounds inside the cylindrical. The barrel, frame and cylinders are constructed of stainless steel with the finish being brushed, and the grips are an overmolded Hogue. The gun feels as if it’s the extension of your hand as it is sized to fit your fingers just right. The polished finish can also help cover scratches and fingerprints.

When tested, the revolver was working flawlessly. It performed flawlessly during testing. Our only issue we found was a minor annoying issue involving the sideplate. It slightly misaligned to the frame. There is just a little bit of steel exposed when it faces. It would cause a lot of trouble on a regular pistol. But, since the Colt does not have any unintentional edges, the issue is not as obvious.

It comes with a vented rib that has a complete underlug, a 10 shot gun cylinder, and the design of a “snakegun”. Its square-butt frame and leaf mainspring add durability. Both the hammering and triggers were smooth and constant. The double-action pull trigger averaged around 10 pounds. Single-action triggers are a little lighter, at around three pounds. There is a way to take off the front sight, which is a bead of brass that sits on top of the frame.

Adjustable Front Sight

The front sight with adjustable adjustment on the Colt King Cobra is a important feature that can improve the accuracy of shooting and targets. A front sight that is adjustable is more convenient than fixed sights, which can oblige the shooter to turn the barrel, which can increase range.

As they reduce parallax, aperture sights are sometimes called ghost-ring sights. This kind of sight utilizes the slider, which has a V-shaped notch to align between the front sight posts and the intended target. The slider can fold to the side or raised when using. Under low light conditions https://coltforsale.com the depth of focus is maintained. That means the object will appear sharper when using closed sights, than it would be with the open view.

The sights have also advantages of self-illuminating. Tritium emits a gorgeous glow that aids in the focus of on the eyes, and increases shooting accuracy. It is particularly useful for the darkest of conditions and tactical circumstances.

The LPA MC90F is durable and reliable sight for Colt KCobra. It is equipped with an Ergal ramp with an adjustable height that can be adjusted from 14 mm to 18 mm. It can also be set to adjust the windage from either side by 0.5mm. This sight is compatible with many rear sights. It can also be used to upgrade any pistol.

Adjustable Rear Sight

It is essential to use an adjustable rear sight on you Colt revolver. Its hardened chrome construction gives a more clear sight that is precise and allows for an incredibly secure fit in the frame. This rear sight can be used with the 2020 and later Current Production Colt Pythons, Anacondas and Officer Model Match Revolvers, and also the Colt King Target Revolver. This sight is specifically designed to give the most accurate shot possible with the capability to alter the front and rear sights at the same time to ensure that they are both along the same line.

Furthermore, the rear sight can be adjusted via clicks to control tilt and windage. It is available in various different LitePipe colors. The front sight is tritium dot standard, that makes it more visible under all lighting conditions.

The rear sight that is adjustable has a a folding leaf that folds against the ramp, preventing interference with a tang peep or scope. Its raised v-notch helps the user in aligning back sight lines with front sight. This increases accuracy. The notch can also be accessible and adjustable to change the impact point (POI) at different distances. An adjustable set screw is part of the adjustable view. It’s located on at the top of the assembly, and aids in locking the rear blade. Turn the screw counterclockwise to change the position of the POI. If you’re looking to shift it towards the right side, turn the screw counterclockwise.

Weight

King cobras are fierce serpents with agility that possess the capability to disperse neurotoxins just in one go. It is enough to kill as many as 20 people as well as an entire elephant. The animal’s venom is a threat to respiratory systems in the brain, leading to breathing failure and cardiac arrest. They are powerful reptiles that live in plains, rain forests, and plains of India Southern China as well as Southeast Asia.

Colt is bringing back the King Cobra revolvers to offer those who love revolvers an array of revolvers for self-defense, target shooting and hunting. The full-sized wheelguns feature 4-inch barrels with adjustable sights. These wheelguns can be used using 38 Special or 357 Magnum ammunition. Their lockwork uses a linear leaf spring design, with the upper part driving the hammer and the lower leg serving as the return spring to trigger. Double-action pull triggers are so smooth that it is broken at 9 pounds.

The cylinder is constructed from US made forged stainless steel and it comes with an adjustable target rear sight and front view with fiber optic. Double-action triggers for target are smooth easy to use, and lightweight. They also have some slight stacking at the top. This lets you know that it’s time to check the sights. The additional trigger guard gives plenty of room to accommodate gloves, as do the handles, which are Hogue with rubber overmolded. Target comes with Altamont Wood stock laser-engraved with embedded Colt logos.

Price

Colt King Cobra is a dual-action revolver that comes in many sizes and configurations. The brushed stainless steel appearance makes it a desirable option for any collection of firearms. Additionally, it has a sturdy firing mechanism and is able to carry multiple rounds. This makes it a safe and secure choice for firing targets and self-defense.

Small revolvers that can effortlessly be carried in a pocket, still function excellent. They’re also perfect to serve as a backup weapon for home defense, particularly. The Colt King Cobra (and a handful of other models) appear to be at the forefront of this new trend with a firearm that’s just a little bit larger than a snubby but small enough to be used for daily carry.

King Cobra revolver is a great choice. King Cobra revolver is also smaller in caliber than the other. This is especially important for new shooters who might be uncomfortable with the recoil that comes from larger guns or don’t have the funds to invest in ammo.

One of the key aspects of a high-quality double-action revolver is the easy trigger pull. The trigger on the Colt KingCobra is smooth and comes with a good amount of overtravel. This allows you to control the discharge and ensure accuracy. The double-action pull on the trigger weighs in at 10lbs. It is lower than previous S&W revolvers and Colt revolvers.